The parts page updated Dec 2017

Below you will find chassis and body part sources, Click here for the Engine Parts Page.

You can use the part numbers below and if your local parts store doesn't sell this particular brand they can cross the part numbers over to their brand. 

Looking for the rubber seal that goes around the glass in your WINDSCREEN FRAME? I searched every source on Vancouver Island, Vancouver, and then all over the internet trying to find something that would fit properly. The only source that I found is SCOTTS OLD AUTO RUBBER in AUSTRALIA here is the link to the page http://www.scottsoldautorubber.com.au/AUSTIN%20GYPSY.htm  it is part number 218.011. It fits perfectly and is almost identical to the original rubber. Their main page is at  http://www.scottsoldautorubber.com.au/catalogue.htm You need approx 2.2 meters per glass section.



The following part numbers are what I have found for my Series 2 swb flexitor Gipsy 

DESCRIPTION                    MANUFACTURER            PART #

Master cylinder kit                Girling                              SP1967
Clutch cylinder kit                 Girling                             SP1963

Clutch slave cyl kit               Girling                               SP2017
Wheel cylinder kit                Girling                               SP 2018/1      


Here are the Zenith part numbers for older style Zenith carbs with the diaphragm on top. The best source I have found for carb kits is Burlen carbs


GP10 Gasket pack 

016822 Insulating gasket

B17329 Diaphragm kit


Distributor cap                     Prestolite                                 3-15L 
Ignition points                      Blue Streak                              LU-1617XP 
Condenser                           Blue Streak                              LU-206 

Oil filter                                Purolator                                  MF-52A 
                                            Fram                                        C-870PL or CH-820PL 

Flexitor suspension hub parts

Front outer hub seals             National                                 451948      dimensions: 2.062" x 2.875" x .437" 
Front inner hub seals             CR                                         23440      dimensions: 60mm x 80mm x8mm 
Rear inner and outer seals are the same as front on flexitor suspension

Front inner and outer 
wheel bearings                    BCA / Timken                          BR5 or A5 or Set5 
Rear inner and outer bearings are the same as front on flexitor suspension 

Flexitor Differential side bearing seals    CR  12458 
 Pinion seal all models                            CR   15230

Axle Universal joints   Flexitor models          Precision                      369 
 Prop Shaft Universal joints    all models        Moog                           344

Main Gearbox all models

First motion shaft bearing    NSK                                      6309NR

First motion shaft seal           National                                 473211

Trans output                        CR 16072